Order Pickers N20 V / N20 Vi (0.6t-2.0t)

• Model: N20 V / N20 Vi (0.6t-2.0t)

• Engine: Electric

Download specification (PDF): N20V/N20Vi (BR 149)    

Download Acrobat Reader

Отправить заявку >>

<Top>

The gateway to efficient order-picking

These models are designed for vertical order picking on two levels where more frequent picking is required from the second level. The N20 V has forks welded to a rising operator's platform and allows direct access to pallet on the forks while picking at the second level. The N20 Vi has a rising platform only, while the forks have an initial lift of 125 mm to allow the horizontal transfer of picked loads.

<Top>

Effective order picking by design

Linde order pickers are designed to optimize the entire order-picking cycle.

·  including preparation, order-picking and final operations

·  so that high pick rates can be achieved without operator fatigue

• The Linde workstation is located directly adjacent to the forks, thus providing route savings up to 1.5 km per day.

• The picking list is always in view of the operator for route saving and fatigue free picking

• a guarantee for lower error ratio

<Top>

• A wide and low access with integrated automatic vigilance device facilitates getting on and off the N20 V / N20 Vi.

• The self centering Linde steering wheel guarantees for safety and operator convenience.

<Top>

• The version Vi has initial lift of the forks to provide more ground clearance when negotiating, ramps, gradients and ground undulations.

• Different fork lift types are available until 2,000 kg load capacity.

<Top>